Warehouse, packing line, shipping dock: cartons, pallets, bags and parts get marked all day long. But not all markers are equal, and the big divide is between two families: ink and paint.
Here is how to choose, with the models in the U-Mark range distributed by ThermoLabels.ca.
The Difference in Brief
An ink marker lays down a fluid, fast line, ideal for writing, annotating and identifying on smooth surfaces or cardboard. A paint marker leaves a more opaque mark, made to stand out on dark, rough, oily or rusty surfaces.
In other words: ink for everyday writing, paint for demanding surfaces or marks that need to stand out.
The Ink Family: M1, M2, M3, M5, M15
M1 Fine Line
The M1 delivers a fine permanent-ink line for precise identification: serial numbers, codes, small inscriptions.
M2 Bullet Tip
The M2 has a bullet tip for a consistent everyday line. It is the daily workhorse.
M3 All Purpose
The M3 is the all-purpose marker for the warehouse, the shop and shipping. If you only remember one for logistics, start with it.
M5 Chisel
The M5 has a chisel tip that draws wide or fine lines depending on the angle. Handy for going from lettering to annotation with the same hand.
M15 Permanent
The M15 has a broad tip for marking cartons and large surfaces. It is designed for legibility at a distance on cardboard.
Tekmark and PHD: The Special Cases
The Tekmark Indelible is an indelible ink marker, designed for marks that resist rubbing and time. For inscriptions that must survive handling, it is an option worth evaluating.
The PHD Plastics Marker targets problem surfaces: difficult plastics, stretch film and waxed cartons. On these smooth materials, many markers slip or fade. This one is designed to give a clean mark with good adhesion.
When to Switch to Paint
As soon as the surface becomes rough, oily, rusty or dark, ink reaches its limits. Here are some benchmarks.
- A10: versatile industrial marking on metal.
- A30 Broad: rusty metal and rough surfaces.
- 100P Industrial: oily or rusty metal and concrete.
- 130P reversible: oil-based paint with a reversible tip, from fine to broad line.
People sometimes search for an "oil marker": that mostly points to the oil-based paint family such as the 130P. If you are unsure, our team will guide you.
Quick Decision Table
- Cardboard cartons, shipping: M3 or M15
- Fine identification: M1
- Everyday writing: M2
- Wide or fine lines: M5
- Durable mark: Tekmark
- Stretch film, plastics, waxed carton: PHD
- Metal, rust, oil, concrete: A10, A30, 100P, 130P
And When the Mark Must Be Temporary?
The range also includes removable markers, such as DR. PAINT and DR. MARK, designed for marks that come off with detergent. The UV 10, visible only under black light, is used for control and inspection. In these cases, validate compatibility with your surface with our team.
Choose According to Your Workstation
At receiving, you mostly annotate cartons: an all-purpose ink marker is generally enough. At shipping, legibility at a distance matters most, hence the value of a broad tip. In production or maintenance, metal surfaces dominate and paint takes over. Mapping your workstations one by one saves you from buying a "universal" model that ends up suiting nobody.
Also think about how long the mark needs to last. An inscription that only serves for the length of a trip does not have the same requirements as a reference that stays with a part for months. Ask the question at every station and write the answer in your marking procedure: it is the best time investment of the whole process.
A Golden Rule: Test
No data sheet replaces a trial on your actual material. We do not publish precise durability or resistance promises, since they depend on the surface, humidity and handling. Run a trial, compare, then standardize.
Next Step: A Quote or Samples
Do you mark cartons, plastics or metal parts and want the right marker for each station? Request a quote or samples: our team validates the model, the surface and the conditions of use with you before you order. Browse the complete U-Mark marker range, then write to us.
Our team will help you build a simple selection of two to four models from our industrial markers page.
Do you also identify your products, cartons or pallets? Explore our thermal labels, ARMOR-IIMAK ribbons and Zebra printers, or keep reading on the ThermoLabels blog.
Our team responds within 2 business hours
Permanent stock in Quebec. Fast local supply.

