In a plant, a fabrication shop or a steel yard, a mark must be readable at first glance and stay in place until the next step. When it disappears, or simply does not take, it means lost time and sometimes a part to redo. Choosing the industrial paint marker is therefore not a detail: it is an operations decision.
ThermoLabels.ca recently began distributing U-Mark markers. Here is a simple way to find your way around the paint marker range.
Start with the Surface, Not the Model
Before comparing data sheets, ask yourself three questions: what are you marking, what condition is the surface in, and how long must the mark stay legible? Clean, dry steel does not require the same paint as a part still covered in machining oil or a rusty beam stored outdoors.
- Clean metal or routine use: a versatile marker is often enough.
- Rusty or rough metal: you need a broad tip and good paint flow.
- Oily metal: to be handled with a marker designed for this industrial use.
- Enclosed space: the water-based formulation becomes relevant.
The A10, A20 and A30 Models
A10: The Everyday Safe Bet
The A10 is a versatile paint marker designed for everyday industrial marking, on metal and industrial surfaces. If you are looking for a reliable model to keep at every workstation, it is a good starting point.
A20: The Reversible Tip
The A20 reversible offers a dual-use tip and 30% more paint, which suits crews that mark a lot and do not want to change markers every week.
A30: The Broad One for Rusty Metal
The A30 Broad combines a broad tip and the Megaflow system. It is intended for rusty metal and rough surfaces, where a fine line gets lost in the roughness.
The 100P and 130P Models for Difficult Surfaces
The 100P Industrial targets oily metal, rusty metal and concrete, with an opaque and durable mark. It is the model to consider when conditions are harsh. Its 100P Fine Line variant adds a fine line when precision matters, for example to write a lot or part number.
The 130P reversible is an oil-based paint marker whose reversible tip lets you go from a fine to a broad line without changing tools. Useful when the same station does both layout marking and detailed identification.
The W20: Water-Based, Low VOC
The W20 is a water-based, low-VOC paint marker suited to enclosed spaces. If your priority is the work environment, it is the lead to explore first. To confirm it suits your specific surface, validate with our team.
A Quick Table to Decide
- Everyday use, metal: A10
- High volume, reversible tip: A20
- Rust, rough surface: A30
- Oil, rust, concrete: 100P or 100P Fine Line
- Oil-based paint, fine or broad line: 130P
- Enclosed space, water-based: W20
Common Mistakes to Avoid
The first is choosing a single marker for the whole plant. A generic model does the job until the day the surface changes. The second is not testing: always try the marker on a representative part, in your real conditions, before standardizing. The third is forgetting handling: a mark that will be rubbed, exposed or moved must be planned accordingly.
We do not publish drying times or resistance to specific conditions here: this information depends on the surface and the use, and it is validated with our team rather than with a generality.
Standardizing Without Complicating
The most efficient shops limit their selection to two or three well-chosen models, stored in the right place. A holder such as the U-Holder helps keep markers within reach in the field. The result: less waste, fewer lost markers and consistent marks from one shift to the next.
Next Step: A Quote or Samples
Do you mark steel, fabricated parts or equipment and want the right marker for each surface? Request a quote or samples: our team validates the model, the surface and the conditions of use with you before you order. Browse the complete U-Mark marker range, then write to us.
Our team will help you build a simple selection of two to four models from our industrial markers page.
Do you also identify your products, cartons or pallets? Explore our thermal labels, ARMOR-IIMAK ribbons and Zebra printers, or keep reading on the ThermoLabels blog.
Our team responds within 2 business hours
Permanent stock in Quebec. Fast local supply.

